AN ACCURATE, COMPACT & INNOVATIVE PROFESSIONAL TIMING SYSTEM MADE FOR SWIMMING.

Freelap professional timing system gives you complete, reliable and accurate live data on your performance. You are then able to establish a complete and objective analysis, and thus quickly improve your results.

Completely automatic and wireless, it frees you from manual timing, and lets you focus on training.

Ultra motivating for athletes, Freelap system is a powerful tool for progression.

 

  • Automatic timing of lap times and rest times
  •  Heart rate measurement
  •  Accuracy of 2/100 seconds and heart rate beat per beat
  •  Can be used by the coach (visualization of live data at the edge of the pool or later) or by the swimmer (using a connected watch and a headset to receive his data live throughout his training.).
  •  Ability to time several swimmers simultaneously (and track up to 4 swimmers live in full screen mode)
  •  Ability to add the distance of the pool to know the total swimming distance covered during the training
  •  Live results via MyFreelap app, and records for later consultation.
  •  Chart containing both the lap times, rest times and heart rates (beat per beat), which lets you establish a quick, complete and objective analysis of the performance.
  •  System designed for swimming, fully waterproof and chlorine resistant.
  •  Convenient, compact and quick to install.

 

The Swim Vest is available in 4 sizes: XS, S, M and L. In order to choose the most suitable size for your body shape, please refer to our size guide below.

 

A Tx H20 Transmitter is required to transmit data to your Bluetooth device.

 

Kit Includes

Freelap Fx Swim Receiver

Freelap Cardio Belt

Freelap Swim Vest

 

<85cm   XS
80-95cm S
90-105cm M
100-110cm  L

Freelap Swim Kit 2

AU$1,100.00Price
Vest Size
  • FX Chip

    • Dimensions: 52 x 43 x 10mm
    • Weight: 20g
    • Technology: Bluetooth smart (BLE)
    • Data: Lap Time (LAP) / Rest Time (Break) / Heart Rate (HR)
    • Compatibility: Swim Belt, Swim Vest, Tx H2O Pro
    • Accuracy: Time: 2/100 of a second / heart rate: beat by beat
    • Memory: 48 hours of training
    • Battery: CR 2032
    • Battery life: 400h hours (+ low battery indicator)
    • Water resistance: 5ATM
    • Operating temperatures: -20 ° C to +50 ° C

    Swim Belt

    • Dimensions: 275 x 38 x 7mm
    • Weight: 30g
    • Technology: Low frequencies
    • Compatibility: Swim Vest, FxSwim, Tx H2O Pro
    • Accuracy: Detects all heartbeats
    • Detection distance: 50cm (the Swim Belt is placed on the swimmer’s chest, maintained perfectly by the Swim Vest)
    • Battery: CR 1632 / 4’000h of training
    • Water resistance: 5ATM
    • Operating temperatures: -20 ° C to +50 ° C
  • • TURN ON YOUR SWIM BELT :

    The Swim Belt does not have any buttons. It turns on automatically when the electrodes are in contact with the skin. It turns off automatically when it is no longer in contact with the skin.

    • ATTACH THE SWIM BELT TO THE SWIMMER :

    – Humidify the electrodes of the Swim Belt.

    – Hook one side of the Swim Belt to one side of the elastic band. To do this, insert the plastic hook on the end of your Swim Belt into the hole at the end of your elastic band.

    – Place the Swim Belt on your skin (Freelap logo facing out), just below your chest. Then hook the other end of the Swim Belt to your elastic band.

    – Adjust the elastic band so that it is perfectly placed on your skin, tight enough to stay in place.

    • TURN ON YOUR FXSWIM :

    To switch on your FxSwim: Press the central button for 2 seconds (the device flashes twice quickly to signal that the device is switched on). If the LED flashes rapidly for 5 seconds, it indicates that the battery is low.

    • DETECTING YOUR SWIM BELT BY YOUR FXSWIM  :

    So that your transponder can receive the data collected by your heart rate belt you just have to turn on your FxSwim :

    – Your FxSwim flashes twice every 3 seconds (scanning) to detect heartbeats.

    – The detection lasts 1 minute maximum. If the FxSwim does not detect heartbeats after 1 minute, it turns off (2 slow flashes). Check that the Swim Belt is not turned off or incorrectly positioned.

    – A flash every 5 seconds indicates the sending of the value of the average heart rate of the last 5 seconds.

    • ATTACH THE FXSWIM TO THE SWIMMER USING YOUR SWIM VEST :

    Your FxSwim must be attached to the swimmer using your Swim Vest as follows:

    – Put on your Swim Vest over your Swim Belt (the small pocket must be on your back).

    – Place your FxSwim in the small pocket on the back of your Swim Vest, specially designed for this purpose. Close the pocket with the snap button.

    – The FxSwim must be placed horizontally, facing outwards.

    • TAKE THE START :

    As soon as it detects heartbeat, your FxSwim starts transmitting heart rate data and the timer starts.

    – To take the start:

    – Turn on and place your Tx H2O Pro transmitter on the starting block.

    – Place yourself on the starting block and wait at least 10 seconds in this zone (initial break time before the start).

    – Then take the start: as soon as you leave the detection field of the Tx H2O Pro transmitter, the break time is recorded. The swim session begins.

    – A break time is detected when the swimmer remains at least 10 seconds in a transmitter detection field. As soon as the swimmer stops the break, the recording resumes. When crossing the next transmitter, the lap time and the previous break time will be recorded and sent via Bluetooth. During the training, you will receive data timing each time the swimmer crosses a transmitter field and heartbeat data every 5 seconds via Bluetooth on your mobile device. This data is automatically saved on your MyFreelap app.

    • TURN OFF YOUR FX SWIM & SWIM BELT :

    To stop your FxSwim, press the central button for 2 seconds (the device flashes slowly 2 times). Then, remove your Swim Belt to stop sending the heart rate.

    • DOWNLOAD THE DETAILED DATA (CHART) :

    To access the detailed chart you must:

    – Turn off your FxSwim and remove your Swim Belt.

    – Then, press 3 short presses on the central button of your FxSwim. From your mobile device, go to the training session and click on “Download” and then on the “Chart” tab

PO Box 1063
Flagstaff Hill 
South Australia 5159

©2020 by FREELAP TIMING SYSTEM - FREELAP AUSTRALIA / NEW ZEALAND.